KSL staubtechnik gmbh

Standard test dusts

Product Features

Our standard test dusts guarantee standard conformity for your tests and product qualifications.
 

Arizona dust (ISO / SAE)

KSL provides four different types of Arizona dust. A comparison of these dusts can be found here.
 

Arizona dust ARIZ-TD

Test dust in the four grades A1, A2, A3 and A4. Composition and particle size distribution correspond to ISO 12103-1.
 

Arizona dust quartz ARIZ-ISO

Test dust from quartz (> 97 % SiO2) in the four grades A1, A2, A3 and A4. The particle size distribution corresponds to ISO 12103-1.
 

Arizona dust quartz-free ARIZ-KSL

Test dust in the three grades A2, A3 and A4. The particle size distribution corresponds to ISO 12103-1. Quartz-free alternative to Arizona dust – no health hazard due to crystalline quartz.
 

Arizona dust SAE J726 fine, coarse

Synthetically produced test dust according to SAE J726 REV. JUN93 Table 4 (preceding standard to ISO 12103-1).
 

DIN test dusts

Talc dust according to DIN EN IEC 60529, VDE 0470

Degrees of protection provided by enclosures (IP-Code).
 

Test dust according to DIN EN 60068-2-68

For environmental testing, dust and sand according to variant 1 – fine dust, variant 2 – coarse dust, variant 3 – sand.
 

Test dust according to DIN 40050-9

Made of mineral components and flue ash, Road vehicles; IP-protection class, protection against contaminants, water and contact, electric equipment.
 

Sodium chloride (NaCl) according DIN EN ISO 9227

Corrosion tests in artificial atmospheres – Salt spray tests.
 

MIL test-dusts

Blowing Dust

Test dust according to MIL-STD 810
 

Blowing Sand

Test dust according to MIL-STD 810
 

Settling Dust

Test dust according to MIL-STD 810
 

Red China Clay

Synthetical test dust according to MIL-STD 810
 

ECE test dusts

Test dust according to ECE R 16

Dried quartz powder with defined particle size distribution for testing of seat-belts and restraint systems.
 

Test dusts according to ECE R 45 / R 112 / R 113 / R123 (2.1.1 or 2.1.2), annex 4

Made of various components corresponding to the standards for testing of headlamps:
ECE R 45: Headlamp cleaners
ECE R 112: Asymmetrical headlamps
ECE R 113: Symmetrical headlamps
ECE R 123: Adaptive front-lighting systems
 

Further standardized test dusts

Test dusts according to JIS Z 8901

Synthetically produced powders following the specification to Class 1, Class 2, Class 3, Class 7, Class 8, Class 9 and Class 11.
 

Portland cement according to ASTM C150

Portland cement according to ASTM C150-15 Type I.
 

Test dust "China" according to FLTM BZ 106-01

Synthetically produced test dust in three particle size distributions; fine (= FLTM BZ 106-01), medium and coarse.
 

Test dust according to IEC 60079

Test dust with very low thermal conductivity.