International standards

Talc dust according to DIN EN IEC 60529, VDE 0470

For testing degrees of protection provided by enclosures (IP Code).

Test dust according to DIN EN 60068-2-68

For environmental testing: dust and sand according to variant 1 – fine dust, variant 2 – coarse dust and variant 3 – sand.

Test dust according to DIN 40050-9

From mineral components and fly ash – degrees of protection (IP Code), road vehicles, electrical equipment.

Sodium chloride (NaCl) according to DIN EN ISO 9227

Corrosion tests in artificial atmospheres – Salt spray tests.
In addition to pure NaCl, we also offer “Northern salt“, a salt mixture of 95% NaCl, 2.5% MgCl2 and 2.5% CaCl2 (acc. LV 214).

Test dust according to DIN EN IEC 60079-0

Explosive atmospheres – Part 0: Equipment – General requirements: Test dust with very low thermal conductivity (< 0.1 W/m*K).

Albite according to DIN SPEC 4867

Test dust for standardized cleaning test methods for the abrasion resistance of glass coatings for solar applications.

eskal 300 according to DIN EN IEC 60335-2-69

Very fine limestone dust made from naturally pure calcium carbonate. Used e.g. to test electrical devices based on DIN EN IEC 60335-2-69.

Silica sand according DIN 52348

Testing of glass and plastics: wear test – sand trickling method.

Silica sand according DIN EN 12904

Products used for treatment of water intended for human consumption – Silica sand and silica gravel (in parts).